As strict EU packaging rules close in, formulators must balance recyclability with real-world performance. Explore how raw material trade-offs, repulpability testing, and supply risks will impact your packaging adhesives and paper adhesives strategy – and how to adapt now.

Paper packaging is expected to replace some plastic formats, putting paper adhesives’ repulping performance under closer scrutiny.
Paper packaging is becoming the go-to option for many industries. It is expected to replace some plastic formats, support growing e-commerce distribution, and meet stricter recycling requirements. That puts paper adhesives under closer scrutiny, because their performance during repulping can affect whether the finished package is recyclable.
The EU Packaging and Packaging Waste Regulation (PPWR) took effect across the EU on August 12, 2026, although the main recyclability grading requirements will come later. For formulators, the immediate concern is not to replace every packaging adhesive, but to understand the trade-offs between performance, recyclability, compliance, and supply reliability. The sections below look at the PPWR timeline, current testing approaches, the differences between starch, dextrin, and PVA systems, and the practical steps formulators can take now.

The PPWR, Regulation (EU) 2025/40, entered into force on February 11, 2025 and has generally applied across the EU since August 12, 2026. This EU packaging regulation replaces the previous Packaging and Packaging Waste Directive with a directly applicable framework for packaging placed on the EU market.
For paper adhesives, the important point is that August 12, 2026 is not the date when every package must already meet the final recyclability grading system. The detailed Design-for-Recycling criteria and recyclability grades are still being developed.
The European Commission must establish these criteria through delegated acts by January 1, 2028. Packaging will then need to meet grades A, B, or C from January 1, 2030, or 24 months after the delegated acts enter into force, whichever is later. From 2038, only grades A and B will be permitted. This gives formulators time to assess current adhesive formulations and identify suitable alternatives.
The Commission must also report by the end of 2026 on substances of concern that may affect the recyclability of packaging. This is another reason for formulators to monitor the development of the rules and review their adhesive systems now.
The EU PPWR does not assign a separate recyclability grade to the adhesive holding a paper package together. Instead, the packaging unit is assessed as a whole. This means the adhesive forms part of the package’s overall design and recyclability performance. The distinction is important for formulators because an adhesive can affect whether a paper or board package performs well during repulping.
Several established methods can help assess recyclability. INGEDE Method 12 evaluates the fragmentation and screenability of adhesive applications in paper and board, while PTS-RH assesses the recyclability of wet-strength papers and packaging. Although PTS-RH is not an adhesive-specific test, it shows why the interaction between paper components and the repulping process must be evaluated under defined conditions.
There are also CEPI and the Aticelca method used in the paper and packaging industry to assess aspects of dispersibility and recyclability. These methods can provide useful information when comparing adhesive chemicals or evaluating a new adhesive formulation.
A major challenge for formulators is that there is no single test method or pass/fail threshold for adhesive repulpability across every paper packaging application. Different mills and adhesive suppliers may use different protocols and acceptance criteria. When comparing paper adhesives, don't assume that an adhesive formulation will produce the same results in every recycling system.

Before comparing adhesive formulations, it’s important to clarify where starch, dextrin, and PVA are used. E-commerce packaging, for example, uses different types of tape. Water-activated paper tape often relies on starch-based adhesive systems and is part of this comparison. Rubber-based pressure-sensitive tape belongs to the broader industrial adhesives category and is not part of the same starch/dextrin/PVA trade-off.
In paper bags, carton sealing, and other fiber-based packaging, the adhesive becomes part of the paper recycling stream. Because of this, packaging adhesives must provide sufficient bond strength while also breaking down during repulping.
Food-contact applications, such as paper bags for bread and other groceries, have additional requirements. They must satisfy the applicable EU food-contact requirements alongside PPWR considerations. The European Commission confirms that food-contact materials must comply with Regulation (EC) No 1935/2004 and applicable good manufacturing practices.

Choosing between starch or dextrin and PVA isn't just a choice between a “sustainable” adhesive and a “synthetic” one. Each chemistry has different performance characteristics:
Starch and dextrin systems: Corn and potato starches used in paper packaging usually perform well during repulping, but have limited resistance to water and humidity.
PVA (polyvinyl alcohol): PVA can dissolve in water, but its recyclability depends on its molecular weight and degree of hydrolysis. Higher-molecular-weight and highly hydrolyzed grades may dissolve more slowly, requiring more heat and longer residence times during repulping.
Tackifiers, plasticizers, and rheology modifiers: These components can adjust tack, open time, and viscosity in packaging adhesives.
Neither system is the right choice for every application. The decision depends on the required performance, package format, recycling process, and supply conditions.

The market for paper adhesives doesn’t just depend on regulation. Paper packaging is the go-to choice for brands looking for alternatives to plastic packaging formats. E-commerce has also sustained demand for shipping boxes, paper mailers, labels, and tapes. These trends increase the importance of reliable packaging adhesives and adhesive raw materials.
CEPI reported that European paper and board production reached 77.4 million metric tons in 2025, although total production declined by 1.6%. Packaging grades were comparatively stable, demonstrating the continuing importance of packaging within the paper industry’s product mix.
The move toward sustainable paper adhesives also creates a sourcing question. Starch and dextrin are agricultural derivatives, which means crop yields and weather conditions can affect availability and pricing. A large-scale shift to bio-derived adhesive options could therefore increase pressure on specific feedstock supply chains.
As a synthetic polymer, PVA is exposed to different manufacturing and petrochemical market dynamics. Neither option is immune to supply risks, so adhesive formulators need to understand the limitations of both. Diversification and formulation assessment are important for maintaining flexibility and establishing alternative sources before the detailed PPWR requirements take effect.

Formulators can take several practical steps now:
Map current adhesive systems against the repulpability test protocols your key paper mill partners actually use.
Re-test wet strength, tack, and open time on your production line before switching systems.
Build in supply flexibility across both agricultural- and petrochemical-derived raw materials.
Engage raw material suppliers early for formulation support, rather than waiting for the 2028 grading criteria.
For food-contact applications, confirm food-contact material compliance alongside recyclability testing.
Keep documentation on adhesive selection and testing available for packaging producers further down the chain.

HSH Chemie provides technical, formulation, and sourcing support for manufacturers evaluating adhesive raw materials as packaging requirements evolve. Our adhesives portfolio includes rheology modifiers for viscosity and application control, as well as tackifiers and plasticizers for adjusting tack and bonding performance. It also includes wetting and dispersing agents, binders and resins, and crosslinkers for broader formulation requirements. We provide access to components used in adhesive formulations for paper packaging applications.

For manufacturers navigating the EU PPWR transition, the value of a distributor extends beyond access to individual adhesive chemicals. HSH Chemie has more than 30 years of chemical distribution experience in Central and Eastern Europe. Our regional presence combines sourcing, logistics, warehousing, and technical support close to our markets. We can support formulators as they compare paper adhesives based on starch, dextrin, PVA, or hybrid approaches for specific packaging applications. We also help suppliers access established CEE networks and introduce new adhesive raw materials and formulation solutions.
PPWR doesn’t require formulators to make every adhesive decision overnight. However, the combination of regulatory change and growing demand for paper-based packaging makes early evaluation necessary.
If you are reviewing your formulations or want to expand your presence in Central and Eastern Europe, check out the available options through our adhesive portfolio page. You can also discuss your specific requirements with our technical team.
Also, if you want to read more of our articles, you can explore our HSH Stories and/or Industry News articles on our website.